Signs There’s a Problem with Your Private Well in Snohomish

private well snohomish

If you depend on a private well on your Snohomish property for drinking, cooking, cleaning, and bathing, an issue with your system can mean a huge disturbance to your daily routine. Spotting a problem early can be key to maintaining that routine. The earlier you catch the malfunction, the easier it will be to fix. To prevent expensive water well repair, contact a private well professional when you notice any of the following difficulties in Snohomish.

Your Faucets Spit

One of the first signs of trouble in your private well is a spitting or sputtering faucet. You may notice that your water runs freely for a moment before it’s interrupted by short bursts of air. The cause is usually air in your plumbing; your faucet sputters as air is expelled from your water pipes.  

The simplest solution to your sputtering faucet is to bleed the entire system.  Turn on all the faucets in your house a half turn, and let the water run for a minute or two.  This will allow all the air to escape.  Next, flush your toilets.  This should flush out any lingering air from your water pipes. If this fix doesn’t work, you may need to call in the experts.

Drastic Increase in Your Electric Bill

Have you noticed a drastic and seemingly unwarranted increase in your electric bill?  A higher electric bill can indicate that your pump is failing or that it needs to be lowered. 

Looking For a Private Well Expert in Snohomish?

When you need a private well expert in Snohomish, contact us at A-Plus Water Services Inc. in Arlington. Our team provides expert advice, quality workmanship, and unbeatable customer care. You can also count on us for water tank repair and water treatment

Private Well Experts in Snohomish

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington & Everett


Posted on July 27, 2021 | Published by Ignite Local | Related Local Business

Do You Need a Well Water Storage System in Marysville?

well water storage system marysvilleIf you have a well on your property in Marysville, have you considered installing a well water storage system?  Traditional systems have pressures tanks; this may be good enough for your situation. Following are some reasons a storage system might be a better bet for you.

Your Well Water Production Drops

Having a storage system installed ensures that you will have plenty of usable water available. If your water well production drops, the tank can be filled slowly and you have sufficient water stored for household demand.

You Have to Replace Your Pump Too Often

A water well storage tank can significantly reduce the number of “pump starts” for your submersible pump.  Pump starts are what eventually wear down your pump.  This will extend the life of your submersible well pump.

Your Water Pressure is Too Low

Installing water storage system improves water pressure. Some water wells don’t provide the pressure you may need to run your household plumbing fixtures.  A storage system can be sized to provide the desired flow and pressure.

Thinking a Well Water Storage System Might Be Right For You?

Are you interested in learning more about a well storage system for your Marysville property? Now that you’re more familiar with their benefits, you can make a more informed decision regarding your home and property. Contact us at A-Plus Water Services Inc. in Arlington today. Our highly-trained and experienced contractors provide expert advice, quality workmanship, and unbeatable customer care. Whatever your well water needs are, our specialists can help! You can also count on us for water well repair, water tank repair and water treatment services. 

Well Water Storage System Experts in Marysville

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington, and Everett


Posted on June 26, 2021 | Published by Ignite Local | Related Local Business

Important Water Well Information for Camano Island

water well information camano islandIf you have a well on your property in Camano Island it’s important for you to understand how it works. Even though you can call a water service company for help, knowledge of important well information will help you notice problems more quickly if you do have them. You’ll also be able to explain problems more clearly to a technician should you need to call one. 

The Water Pump

Most modern homes have a submersible pump. These pumps are fully submerged in the well and push the water up.  You might also have a jet pump. This pump is fixed above ground and works by drawing water up from the well. 

The Pressure Switch

This switch turns the pump on and off. Typical home settings are 30–50 psi or pounds per square inch, which represents the force at which water enters your home from the water main. If you’re having issues with your well, a well specialist may check to ensure your pressure switch is working properly. 

The Pressure Gauge

Pressure gauges are used to establish the pressure settings for your water well. They do not, however, directly impact the way your well functions. In fact, these can often malfunction, but they don’t require extensive water well repairs

Looking for Water Well Information in Camano Island?

Don’t let your water well remain a mystery. Contact us at A-Plus Water Services Inc. in Arlington for the professional assistance you need today! We’ll be happy to inspect, maintain, or repair your well system. We also have extensive experience with well pump installation, water tank repair, and water treatment. Contact us for assistance with your water well in Camano Island!

Water Well Information Experts in Camano Island

Serving Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington & Everett


Posted on May 27, 2021 | Published by Ignite Local | Related Local Business

What You Need to Know about Well Pressure Tanks in Stanwood

well pressure tanks stanwood

Well systems have several components. There’s the pressure tank, the pump, the switch and the well itself. The tank stores water from the well and supplies it to your home at an appropriate pressure. Although well pressure tanks are common, many homeowners who have one know little about them.  

Let’s Be Positive

Wells don’t usually have positive pressure, which means they need help moving the water to your home. After the water is pumped up, it’s temporarily stored in a well pressure tank until it’s needed. 

How Do They Work?

There are compressed air bags located inside well pressure tanks. These press down on the water. When you turn on a faucet, the pressure in the tank causes the water to flow into your home.

And the Advantages Are…

There are several advantages associated with well pressure tank installations. The primary advantage is that they provide immediate access to well water without you having to manually turn on a pump.

Interested in Well Pressure Tanks in Stanwood?

Are you interested in a well pressure tank installation in Stanwood? Now that you’re more familiar with what these tanks are and how they work, you can make a more informed decision regarding your home. If you think a well pressure tank is right for you, contact us at A-Plus Water Services Inc. in Arlington. Our highly-trained and experienced contractors can provide everything you need for your well, including unbeatable customer care. Whatever your needs, we’re here to help! You can also count on us for water well repair, water tank repair and water treatment services. 

Well Pressure Tanks Installed in Stanwood

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington, and Everett


Posted on April 26, 2021 | Published by Ignite Local | Related Local Business

Well Pump Information for Home Owners in Lake Stevens

well pump information lake stevensIs there a well on property you wish to purchase in Lake Stevens? If so, it’s good to learn ahead of time what’s required. Check with your real estate agent or a water service company to be sure the well pump information on the property you’re considering buying is up to date.

Check the Local Codes

Depending on where the house is located there may be specific codes and standards that must be upheld. See if the home’s previous owner kept a log for the well; this may confirm the well has been kept up to code. You may also be able to locate the well company the prior owner used to service it and make any repairs necessary.

Location, Location, Location

Determine where the well is located and inspect the surrounding area. Verify there aren’t any sources of contamination or obstructions in and around the well site. It’s a good idea to hire a well pump specialist to perform an inspection.

Test the Water Pressure

Low water pressure is typically a sign of a failing well pump or damaged water pressure tank. Having the water pressure tested, as well as having regular water treatment services performed, will keep your system functioning as designed.

Looking for Professional Well Pump Information in Lake Stevens?

If you’re looking for a professional to inspect a well pump in Lake Stevens, contact A-Plus Water Services Inc. in Arlington today! Our team is highly trained and ready to inspect, maintain and repair your well pump system. We also perform expert well pump installation and water tank repair. Visit our website for more information or contact us to schedule service in Lake Stevens today!

We Provide Well Pump Information in Lake Stevens

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington, and Everett


Posted on March 21, 2021 | Published by Ignite Local | Related Local Business

Important Information about Well Jet Pumps in Arlington

well jet pump arlington

If water for your Arlington home is supplied primarily from a well, you’ll want to consider a well jet pump.  For wells deeper than 25 feet, well specialists prefer these pumps. Well jet pumps can pull water from as much as 200 feet down, and they’re designed to move water up and into your home at the correct PSI. Read on, and then discuss well jet pumps with your water service company in Arlington. 

Make a Splash

The most common use for well jet pumps is moving water from a well to a home. They can also be essential for sprinkler systems and other projects on your property.

How Low Can You Go?

Your water service company will help you decide which well jet pump is best for your situation.  For most wells at 25 feet and less, shallow well jet pumps are installed. These use less power, and deliver less water per minute.  But if your system is drawing from deeper down, or if the water has to be moved over a long distance, a deep well jet will likely be the choice. This is also ideal for households that require large volumes of water to be delivered quickly.

Do You Need a Well Jet Pump in Arlington?

If you need dependable pressure and volume from your well, you’ll want to find a dependable company that provides prompt, courteous service.  A-Plus Water Services Inc. in Arlington is veteran and family owned and has been helping water consumers since 1992. Many of their clients are repeat customers or from referrals. You can also contact them for water well repair, water tank repair and water treatment services. 

Well Jet Pump Experts in Arlington

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington & Everett


Posted on February 19, 2021 | Published by Ignite Local | Related Local Business

Common Causes of Water Pump Failure in Granite Falls

water pump failure granite fallsInterested in some of the most common causes of well water pump failure for homeowners in Granite Falls? A submersible pump that is constructed in optimal conditions can last up to 15 years. To keep your pump functioning at peak performance, keep these tips in mind.

Never Ignore Repair Needs

Small problems can quickly escalate into expensive repairs, so don’t wait. Always schedule necessary maintenance, well pump repair and water tank repair with a qualified professional. Having a technician look over your system and lines will alert you to problems and provide you with recommendations.

What Happens when the Power Goes Out?

Generally, the loss of power results in your pump’s failure to function. To prevent this from happening, you can install a well pump with a backup power supply, such as a battery or backup generator.

Loss of Expansion Tank Pressure 

Problems with your expansion tank can also result in water pump failure. These tanks function by utilizing compressed air to force collected water from your well to your home. If pressure is lost, your well pump must work harder to compensate and will eventually fail.

What if you experience Water Pump Failure in Granite Falls?

If you’re having problems with your well pump in Granite Falls, schedule repairs sooner rather than later. For expert advice and excellent customer service, contact A-Plus Water Services Inc. in Arlington today. Visit our website for more information about our many services, including well pump installation and water treatment or contact us to schedule an appointment. We look forward to assisting with your well pump service in Granite Falls!

Help for Water Pump Failure in Granite Falls

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington, and Everett


Posted on January 22, 2021 | Published by Ignite Local | Related Local Business

Is a Water Pressure Booster Pump Right for Your Home in Everett

water pressure booster pump everett

If chronically low water pressure is a problem you struggle with in your Everett home, consider installing a water pressure booster pump. Several factors affect the water pressure in your home, including elevation and the number of people who live there. There’s no need to “just deal” with poor water pressure, however. Your local water service company can help. Discuss installing a booster pump in your home with a specialist in Everett. 

Basic Information

These units make water pressure more consistent. Booster pumps are designed to help push water through your system at a higher rate when street or well pressure is inadequate.

How to Decide Whether You Need One

You might benefit from installing a booster pump if your well doesn’t produce enough power to transport water through your entire home or business. Another possibility is that you have one installed already, but it’s the wrong size. These boosters are especially helpful for homes and businesses with installed lawn sprinklers. 

Interested in a Water Pressure Booster Pump in Everett?

If you’re interested in a water pressure booster pump for your home in Everett, talk it over with a with a professional. You’ll be able to determine whether a booster will resolve your water pressure problems. To receive expert advice, contact the pros A-Plus Water Services Inc. in Arlington today! Our team of highly-trained and experienced technicians will assist you with all your water needs. Count on us for water well service, water tank repair, and water treatment services as well. 

Water Pressure Booster Pump Installation in Everett

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington, and Everett


Posted on December 28, 2020 | Published by Ignite Local | Related Local Business

Important Information About Submersible Well Pumps in Darrington

submersible well pumps darrington

Do you have a well on your property in Darrington? If so, you probably already know there are several different types of pumps available, including submersible well pumps. While your local water service company can help you select the right one for your specific situation, it’s important to have a basic understanding of each. Keep the following information about submersible well pumps in mind as you talk through options with your well specialist in Darrington.

The Basics

Submersible well pumps, sometimes referred to as electric submersible pumps, are easily distinguishable because they are fully submerged in water. This type of pump functions by transforming rotary energy into kinetic energy, which is then converted into pressure energy.

Advantages

There are some key advantages to owning a submersible well pump. The main benefit is that these pumps never have to be primed. They are also very efficient, resulting in lower operating costs. Very little energy is required to keep the water moving; they also have better pressure and volume. Additionally, homeowners have a wide variety of pump styles to choose from for well pump installations.

Interested in Submersible Well Pumps in Darrington?

If you’re interested in learning more about submersible well pumps in Darrington, find a well pump specialist in your area. To receive quality installation and unbeatable customer care, contact the experts at A-Plus Water Services Inc. in Arlington today! Our highly-trained and experienced team can also assist you with all your water tank repair and water treatment needs.

Submersible Well Pump Installations in Darrington

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darrington, and Everett


Posted on November 24, 2020 | Published by Ignite Local | Related Local Business

 

Preparing Your Well Pump for Inclement Weather in Monroe

preparing your well pump monroeDo you know how to prepare your well pump for severe weather in Monroe? While you’re probably familiar with basic storm preparation procedures, you may not know how to properly protect it. Failing to take steps now could result in potentially expensive water well repairs. Preparing your well pump now will save you time and money.

Secure Your Wellhead and Pump

Is your well pump or wellhead exposed? If so, this can be a major problem during a big storm, especially if high winds are expected. To protect your system, you’ll need to cover or secure these features. Otherwise, they could be struck by debris during inclement weather. Take time to address this issue now and save yourself a call to the water service company.

Turn Off Your Pump

If there is even a small chance that you will lose power, turn off the electricity to your well pump. You can do this at your circuit breaker. Always turn the power to your pump off before the storm and don’t turn it back on until the bad weather has passed. You’ll protect your pump’s electrical components by doing this.

Fill Your Tubs and Sinks

Because your well pump will be off during the storm, make sure you fill your tubs and sinks with water. Keeping additional water in jugs for drinking is also a good idea. If damage does occur, speak with a well specialist before using your well again.

Need Help in Monroe Preparing Your Well Pump Before a Storm?

Do you need to speak with a well pump expert in Monroe, Washington? Contact A-Plus Water Services Inc. in Arlington today! Our team of contractors can assist with all your well pump needs, including well pump installations, water tank repairs, and water treatments.

Preparing Your Well Pump For Storms: Experts in Monroe

Serving the communities of Arlington, Stanwood, Marysville, Snohomish, Granite Falls, Lake Stevens, Camano Island, Monroe, Darlington, and Everett


Posted on October 24, 2020 | Published by Ignite Local | Related Local Business